no$gba v2.8 released - with DSi emulation ~ Ilmu Tanpa Sempadan

Open Source, Delay Tolerant Network, Internet of Things

Knowledge Without Boundary

Thursday, February 5, 2015

no$gba v2.8 released - with DSi emulation

no$gba v2.8

Martin just updated his Nintendo DS emulator which now give support to DSi emulation. This is what he said from ngemu forum,

Just uploaded no$gba v2.8. The new version is now having real non-experimental DSi emulation. And it's more or less working with DSi software. So far, it's tested with two DSi cartridges, and two DSiware programs:
System Flaw (cartridge): Works, but the camera emulation is showing only a dummy picture with snow (which is making the game unplayable, since it misuses the camera as gyro sensor).
Cooking Coach (cartridge): Hangs for whatever reason. It doesn't seem to be related to DSi I/O ports, so it might be some more basic problem, like some of the new/bigger memory regions not being properly emulated yet, or some memory not being initialized as how the DSi firmware would do it) (running the game in NDS mode works, the problem occurs only in DSi mode.
DSi Browser (DSiware): Boots, but complains about non-emulated WLAN access point.
Flipnote Studio (DSiware): Hangs for whatever reason, might be the same problem as with cooking coach. Would be great if anybody figures out what is causing the problems!
DSi emulation requires a copy of the lower 32K-halves of the ARM7/ARM9 BIOSes (BIOSDSI7.ROM and BIOSDSI9.ROM). And don't forget to enable DSi emulation (default is still set to NDS mode, for better compatibility with games like Cooking Coach).
PS. Some advice on how to capture camera pictures under windows would be nice! I need something with good backwards compatibility (which would be probably directshow), and it should be something that can be implemented by plain source code (without code from external libraries).

02 Feb 2015 - version 2.8 changelog
- help: updated gbatek standalone version 2.8 (with fairly complete dsi specs)
- dsi: no$gba is now having (more or less) working non-experimental DSi support
- dsi/cartloader: auto-encrypts modcrypt area if needed (requires good sha1hmac)
- gba/snap: fixed skipping empty-nds-chunks in gba-snapshots (thanks shiny.exe)
- newmem: avoids borland tasm32/tlink32 linker-error on "arm_memxlat_non_tcm"
- dsi/help: added list of known regions/countries (only europe is known yet)
- dsi/help: better ndma description (logical/physical blocks, and repeat modes)
- wifi/help: added new DSi access points specs (wpa/wpa2, and proxy settings)
- wifi/help: added formerly unknown NDS access points specs (mtu, ssid length)
- dsi/help: added average microphone specs for ARM7 side (A/D side is unknown)
- dsi/emu: supports fake camera access (outputting some dummy snow picture)
- dma: added warning on unsupported dma/ndma types (wifi,sd/mmc,aes,mic,mainmem)
- debug: fixed $profiler_id indices for dma-channel/mode names
- dsi/emu: supports basic aes and sd/mmc init (32bit 44xxh, 16bit 48xxh/49xxh)
- dsi/emu: supports i2c access (8bit 450xh) and gpio access (16bit 4C0xh)
- dsi/emu: supports new touchscreen controller (different SPI protocol as NDS)
- dsi/help: added description for new touchscreen controller (position/status)
- dsi/help: added notes on touchscreen in nds mode (no pressure & temperature)
- dsi/help: identified the dsi cameras as Aptina MT9V113 image sensors
- dsi/help: added initialization/transfer flowcharts for cameras on ARM9 side
- dsi/help: added initialization flowchart for Aptina cameras on ARM7 side
- dsi/help: added initialization flowchart for Unknown cameras on ARM7 side
- dsi/help: added undocumented aptina regs, and aptina REV3 additions
- dsi/help: added general dsi notes (eg. dsi detection) and info on exploits
- dsi/help: added notes on basic differences to NDS mode (changed details)
- dsi/help: added info about (mostly unknown) eMMC encryption (via CID register)
- dsi/help: added behaviour of SPI powerman (with differences in DSi/NDS modes)
- gba/nds/dsi/help: added BIOS RAM info (initial RAM content and IRQ/SWI usage)
- nds/help: cart header[06Eh] Secure Area Delay, and ROMCTRL.Bit28 gap CLKs
- nds/help: info on rom chip id bit31 cart protocol variant (gap/repeat/delay)
- xboo: supports dumping carts with rom chip id bit31=1 (protocol differences)
- dsi/debug: added tty.log options for I2C commands and NDS cartridge commands
- dsi/debug: prevents warnings on bigger New WRAM areas (unlike 32K for NDS)
- dsi/debug/emu: allows bigger DSi7/DSi9 bios regions (bigger than NDS7/NDS9)
- dsi/emu: allows reading/writing more scfg registers (as far as used by games)
- dsi/emu: initializes more scfg regs on reset (with suspected/guessed values)
- dsi/i2c/help: added Aptina MT9V113 camera specs (i2c registers and variables)
- dsi/i2c/help: added many details on bptwl chip (led/volume/misc controller)
- dsi/help: described power-button modes (auto-reset, irq, forced-power-off)
- dsi/help: major corrections to I2C control reg, added I2C signals chapter
- dsi/help: added details like headphone-connect bit, game-cart-insert-bit
- dsi/cartloader: bugfixed cartloader odd modcrypt lengths (eg. cooking coach)
- dsi/help: added GPIO specs (data in/out/direction, irq edge/enable)
- dsi/help: removed dsi cart protocol, instead added cmd_3Dh notes in ds chapter
- dsi/help: hardware/software info on wiring the eMMC chip to PC card readers
- dsi/help: info on sd/mmc I/O (from TC6387XB datasheet, tmio_mmc, dsi dumps)
- dsi/help: added specs for sd/mmc protocols (commands, repsonses, registers)


Post a Comment